Fundamentals Reloaded | Holosun EPS Carry Reset

Wiki Article

The Holosun EPS Carry is a well-regarded choice for concealed carry enthusiasts. But even with its intuitive design, sometimes you need a solid reminder on the basics. This article dives into the essentials of resetting your Holosun EPS Carry, ensuring you're always good to go. We'll cover everything from understanding the reset mechanism to troubleshooting common issues. Let's get back to basics and make sure your Holosun EPS Carry is firing on all cylinders

By understanding these fundamentals, you can ensure your Holosun EPS Carry is always ready when you need it most.

Powering Down and Up Your Holosun EPS Carry Red Dot

Your Holosun EPS Carry red dot sight is a robust tool, but even the best gear can sometimes need a little TLC. If your EPS Carry seems to be behaving erratically, a simple reboot might just do the trick.

First, locate the on/off lever on the side of your red dot sight. It's usually a small, tactile lever. Press and hold this switch for about 5 seconds until you see the red dot flicker. This indicates that your Holosun EPS Carry is now off and ready to be restarted.

When the sight has powered down, release the switch and wait for a couple of seconds. Then, press the activation switch again to power on your red dot. The red dot should now get more info appear as normal.

If this simple reboot doesn't resolve your issue, you might want to consult the user manual or contact Holosun customer support for further assistance.

Factory Reset for the Holosun EPS Carry

Performing a factory reset on your Holosun EPS Carry can be useful if you're experiencing issues with the sight or simply want to return it to its original configuration. This process will erase all user-defined settings and restore the sight to its factory defaults.

To begin, locate the small reset button on the side of your EPS Carry. Use a thin object like a paperclip or the tip of a pen to activate this button. Hold it down for about five seconds until you see the screen change. Release the button and your Holosun EPS Carry will now be reset to factory settings.

Revert to Factory Settings on Holosun EPS Carry

Need reinitialize your Holosun EPS Carry back to its original configuration? Follow these simple instructions.

First, identify the small reset button on the side of your sight.

Using a pen tip, gently press and hold the button for approximately 3 seconds. You should see the display change, indicating that the restore process is in progress. Release the button and your Holosun EPS Carry will now be at its default configuration.

Resetting the Holosun EPS Carry Red Dot to Default

Occasionally, you could need to return your Holosun EPS Carry Red Dot to its factory settings. This procedure is easy and can be performed in a few actions. First, make sure the sight is turned off. Next, locate the tiny button on the rear of the optic.

Hold this switch for approximately five seconds. You should see a alternating indicator on the display, which signifies that the reset is complete. Release the lever and your Holosun EPS Carry Red Dot will now be at its factory settings.

Taming Default Settings: Holosun EPS Carry Guide

Navigating the territory of red dot sights can be a challenging task, especially when you're introduced into the robust Holosun EPS Carry. This compact and reliable optic is crafted to thrive in a carry scenario, but unlocking its full potential requires understanding its default settings. This guide will reveal the key configurations you can make to fine-tune your EPS Carry for a effortless carry experience.

Report this wiki page